Immediately stop using the equipment, and contact professional maintenance personnel for inspection and repair.
Through the above precautions, you can effectively reduce the operational risks of high-altitude working vehicles and ensure operation safety and normal operation of equipment. For more detailed operation manuals or technical support, refer to the device manual or contact the device supplier.

Check that the ground is level and the vehicle is stationary.
Check whether the connecting parts of the boom and platform are loose.

Check whether the hydraulic oil is sufficient and whether the hydraulic system is leaking.
Check whether the power supply and circuit are normal.

Check hydraulic system, replenish hydraulic oil or replace hydraulic pump.
Check limit switches and control circuits and repair or replace faulty components.
Inspect mechanical parts, clean stuck parts or replace damaged parts.
Through the above solutions and daily maintenance suggestions, you can effectively reduce the problems in the use of vehicle carriers, improve customer satisfaction and equipment service life. If you need more detailed technical support, it is recommended to contact the equipment supplier or professional maintenance team.

Balancing the tires or replacing badly worn tires.
Check suspension system and replace damaged shock absorbers.
Check the drive shaft and universal joints and repair or replace them if necessary.

Check the hydraulic oil level and cleanliness, and replace or replace the hydraulic oil.
Inspect hydraulic pumps and cylinders and replace damaged parts if necessary.
Check hydraulic lines to repair leaks or clear blockages.

Check and replace worn brake pads regularly.
Check the brake oil level, replenish or replace the brake oil, and repair the oil leak.
Exhaust the brake system to ensure the braking effect.

Check the battery level and charge or replace the battery if necessary.
Check ignition system and replace damaged parts.
Check the fuel system, clean or replace the fuel filter, and ensure that the fuel pump is working properly.

Check the insulation layer regularly and replace the aging insulation material.
Repair damaged insulation to avoid heat loss.
Daily maintenance and maintenance advice
Periodic inspection
Check tank, valve, hydraulic system and other key components once a week to ensure that there is no leakage and no damage.
Check the grounding device and static elimination device once a month to ensure that they work properly.
Cleaning and lubrication
Clean tank exterior and interior regularly to prevent corrosion and contamination.
Regular lubrication of valves, hydraulic systems and other mechanical components.
Through the above solutions and daily maintenance suggestions, the problems in the use of aluminum alloy tank trucks can be effectively reduced, and customer satisfaction and equipment service life can be improved. If you need more detailed technical support, it is recommended to contact the equipment supplier or professional maintenance team.

Clean the tank thoroughly before transporting different liquids.
Clean the inside of the tank regularly to ensure that there are no residual impurities or moisture.

Make sure the tank grounding device is in good condition and check the grounding wire regularly.
Control flow rate during oil loading and unloading to reduce liquid sloshing.

Transport in strict accordance with rated load to avoid overload.
Check tank material status regularly, find corrosion or fatigue timely repair.

Check the hydraulic oil level and quality, and replace or replace the hydraulic oil.
Inspect hydraulic pumps and cylinders and replace damaged parts if necessary.
Check hydraulic lines to repair leaks or clear blockages.

Clean the inside of the valve regularly to remove impurities.
Replace worn seals.
Lubricate valve operating rod and replace damaged parts if necessary.

Regular inspection of tank welding, find cracks in time repair.
Replace aging gaskets to ensure tightness.
Check the connection between the oil port and the valve, and tighten the loose part.